6' Compact Tractor Backhoe with Curved Boom, 12" Bucket, Self-Contained Gear Pump&Hydraulic Reservoir included, for 18-35 HP, Cat 1 Hookup, BH600
FREE SHIPPING
12-Month warranty included
Frequently Bought Together
Product Overview
Product Manual
Parts Manual
Product Features
specifications
Which One is Right for You?
Shipping Information
Warranty Information
Video
Reviews & Questions
Recently Viewed
ClearFAQs
What makes the Farmry BH600 3-Point Tractor Backhoe different from other models?
What makes the Farmry BH600 3-Point Tractor Backhoe different from other models?
How much digging depth and power does the BH600 provide?
How much digging depth and power does the BH600 provide?
How is the BH600 connected to the tractor and powered?
How is the BH600 connected to the tractor and powered?
What is the swing arc, stabilizer spread, and loading reach of this backhoe?
What is the swing arc, stabilizer spread, and loading reach of this backhoe?
Why choose a curved-boom backhoe with replaceable bucket teeth and hardened bushings?
Why choose a curved-boom backhoe with replaceable bucket teeth and hardened bushings?
How to check if the PTO extender needed or not if purchasing tractor powerer backhoe?
How to check if the PTO extender needed or not if purchasing tractor powerer backhoe?
For the backhoe models compatible with certain tractor versions (BH600, BH600 PRO, BH700, BH700 PRO, BH820, BH820 PRO, BH920, and BH920 PRO), interference may occur during installation between the PTO pump and the tractor, preventing full engagement with the tractor’s PTO shaft (see left figure below).
When purchasing the above models, please pay close attention to the following:
1. Ensure there is sufficient clearance around your tractor’s PTO shaft (as shown in the right figure below, with a dimension of 7-3/4").

2. Please refer to the following dimensional specifications of the PTO pump to verify compatibility with the PTO shaft area on the rear of your tractor.

3. The PTO pump cannot be installed if any components are located within the shaded area of the pulley pump (dimensions: 160×224 mm / 6.3×8.8 inches) when mounting to the tractor’s PTO shaft area.
If insufficient clearance exists due to the above conditions, a PTO driveline extender will be required.(see above right picture)
This can be purchased on the Farmry website or at most agricultural equipment dealers.
