3-Point PTO Stump Grinder, 34 Carbide Teeth, for 15-45HP Tractors, PTO Shaft Included with Slip Clutch, SG24 tree stumps grinder

A 3 point PTO stump grinder is one of the most cost-effective machines to tackle ongoing stump removal tasks on your own property.

With PTO power coming directly from your tractor, the SG24 stump grinder delivers consistent torque to the cutting wheel, allowing hardened carbide teeth to grind stumps efficiently at ground level. Once attached, you can remove tree stumps wherever your tractor can reach—no rental schedules, no waiting.

Compared with smaller standalone grinders, a point PTO stump grinder like the SG24 is built for serious work, making stump removal faster, easier, and more economical over time.

The efficiency of stump grinding depends on many factors, including wood type, stump size, moisture content, and density. Improper tractor speed can reduce efficiency or cause unnecessary stress on the machine.

The Pro Series stump grinder is designed for operators who want greater control. It integrates a GO-STOP visual guidance system, allowing users to adjust tractor speed in real time based on cutting resistance. This helps prevent over-grinding, reduces abnormal wear on cutting teeth, and improves overall performance.

In addition, the Pro model features a patented shock-absorption assembly, which applies steady pressure during operation, minimizes rebound, and enhances operator safety—especially during continuous or commercial stump removal work.

In general, the best stump grinder is the largest unit your tractor can safely handle.

For the SG24:

• Designed for 15–45HP tractors
• Compatible with 3 point PTO systems
• Tractor PTO HP and lifting capacity should be matched appropriately

Choosing the right size ensures stable operation, efficient grinding, and long-term reliability of both the tractor and the equipment.

Attaching the stump grinder via PTO shaft

Before installation, check whether the PTO shaft included needs to be trimmed to match your tractor’s PTO length. Detailed steps are clearly explained in the user manual.

Once prepared, attach the 3 point PTO stump grinder using the three-point hitch. The SG24 is also quick hitch compatible, making hookup easier for most tractors.

⚠️ Operating with a PTO driveline shaft angle greater than 20° may damage the equipment. Always adjust the top link so the PTO shaft runs as straight as possible during operation.

Turning on your PTO stump grinder

Start the tractor and engage the PTO. Power is transferred through the slip clutch PTO, protecting the driveline as the cutting wheel begins to spin.

With the grinder raised, position it over the stump before lowering.

Grinding away the stump

Lower the cutting wheel onto one side of the stump and grind from back to front. After removing the top layer, lower the grinder gradually and repeat.

Continue until the stump and most surface roots are removed below ground level, then move on to the next stump.

Grinding time varies depending on stump size, wood hardness, moisture, and root structure. That said, stump removal is typically measured in minutes, not hours.

With proper setup and steady operation, the SG24 stump grinder can finish many standard tree stumps in around 15 minutes or less, delivering efficient grinding for routine property maintenance.

The SG24 stump grinder is shipped in modular components for safe transport.

• Assembly takes approximately 1 hour
• Only basic tools are required
• Clear instructions are provided in the manual

For maintenance, routine greasing of bearings, inspection of carbide teeth, and checking the slip clutch PTO are recommended. Replacement teeth and spare parts are available to keep the machine operating reliably.

All maintenance details are outlined in the user manual, which can be found in the black tube on the machine or downloaded as a PDF.

In most cases, no permit or certificate is required to grind stumps on your own property. Local regulations may vary, so checking with your municipality is recommended.

Yes. Subject to compliance with local laws and regulations, the SG24 is suitable for commercial stump removal tasks.

Many customers use this great tool for paid stump grinding services, land clearing, and property maintenance. The machine is built for durability, efficient operation, and consistent performance in real-world working conditions.

Yes. Before operating the stump grinder, the PTO driveline clutch spring height must be adjusted according to your tractor’s PTO horsepower. Proper adjustment helps prevent equipment damage and avoids work interruption.
Please refer to the product manual for the correct spring height values.