How Much Does a PTO Wood Chipper Cost in 2026?

If you are shopping for a pto wood chipper in 2026, the first question is usually simple: how much should you expect to pay? The short answer is that price depends on the chipper’s cutting capacity, feed system, build quality, and the amount of power your tractor can deliver through the tractor's pto. A smaller 5-inch machine for routine cleanup will cost much less than a 6-inch model with hydraulic feed, heavier construction, and higher throughput.

For many homeowners, acreage owners, farmers, and light commercial users, a PTO unit is often a more practical long-term option than a gas powered machine. It lets you use the tractor you already own, process branches, limbs, and yard waste more efficiently, and turn bulky brush into usable wood chips or mulch. But the cheapest unit is not always the best value. The right chipper is the one that matches your property, your tractor, and how often you actually chip.

If you want to compare available models, you can browse Farmry’s pto wood chipper collection or explore the full wood chipper category first.

PTO Wood Chipper Price Range in 2026

In 2026, most buyers will see PTO chipper pricing fall into a few practical tiers.

For Farmry’s current lineup, the price points are clear:

• WCAP5 — $1,698

• CP85 — $1,899

• WCPH6 — $2,999

That means a realistic entry point for a 5-inch PTO chipper starts around the high-$1,000 range, while a 6-inch model with hydraulic infeed moves close to the $3,000 mark.

This price spread is normal. A PTO attachment is not priced only by opening size. Cost also reflects the feed design, the overall weight of the machine, internal cutting system, rotor mass, frame strength, and how well the unit is designed to handle real property cleanup.

For buyers comparing regular price only, it is easy to miss the bigger picture. Two machines may both be called a 5-inch chipper, but they can feel very different in actual use depending on blades, infeed behavior, material handling, and overall performance.

Farmry PTO Wood Chipper Price Comparison

Model	Capacity	Tractor Range	Feed Type	Best For	Price
WCAP5	5"	Up to 45 HP	Gravity/manual infeed	Budget-conscious property owners	$1,698
CP85	5"	Up to 45 HP	Gravity/manual infeed	Buyers wanting a stronger 5" option	$1,899
WCPH6	6"	Up to 75 HP	Hydraulic feed	Heavier cleanup and higher-volume work	$2,999

This table helps answer the real buying question: not just what a PTO wood chipper costs, but what you get for the extra money.

What Actually Changes PTO Wood Chipper Cost?

Several design factors have the biggest effect on price.

1. Cutting Capacity and Branch Diameter

The most obvious factor is cutting capacity. A chipper built for smaller branches and routine yard waste will usually cost less than a machine designed to handle thicker limbs and larger diameter wood.

That does not mean bigger is always better. If your property mostly produces orchard trimmings, hedge cuttings, and light brush, a 5-inch chipper may be the better value. But if you regularly deal with storm cleanup, fence line clearing, or heavier brush piles, paying more for more capacity may improve both productivity and user experience.

2. Hydraulic Feed vs Gravity Infeed

One of the biggest pricing jumps comes from the feed system. A gravity-fed infeed setup is often enough for many homeowners and small-acreage buyers. It keeps the machine simpler and reduces upfront cost.

But a model with hydraulic feed or hydraulic infeed gives the operator much better control over how material enters the chipper. That matters when feeding awkward brush, forked branches, or greener, heavier debris. It also helps the machine maintain consistent results and lowers the manual effort needed at the hopper.

This is one of the main reasons the WCPH6 costs more than the WCAP5 and CP85.

3. Rotor Diameter, Blades, and Internal Build

A chipper’s internal cutting system has a direct impact on both price and real-world performance. A larger rotor diameter typically helps the machine carry momentum through heavier material, while better blades and stronger internals improve cutting consistency and service life.

A well-engineered chipper will usually feed more smooth, discharge better through the chute, and produce cleaner chips with less struggle. Better parts also matter over time, especially when the unit is driven hard across multiple seasons.

4. Weight and Structural Quality

More weight often means more steel, stronger housings, and more durable support around the infeed and cutting chamber. For equipment buyers, this matters. A lighter, more compact unit can work well when the workload is modest, but heavier construction often performs better when the chipper sees regular use on larger properties.

That is part of what separates homeowner-grade value models from units better suited to heavier farm and light commercial use.

5. Tractor Power Match

Every PTO wood chipper depends on matching the machine to the tractor. If your tractor cannot supply enough PTO power, even a good chipper will not perform the way you expect. That is why price and tractor fit always go together.

A 5-inch model for tractors up to 45 HP sits in one pricing band. A 6-inch unit designed for tractors up to 75 HP, especially with hydraulic feed, naturally sits in another.

5-Inch vs 6-Inch PTO Wood Chipper Cost

This is where many buyers hesitate. Is the jump from a 5-inch machine to a 6-inch hydraulic chipper actually worth it?

For many properties, a 5-inch chipper is enough. It handles seasonal pruning, routine brush clearing, and common yard waste well. It also keeps the total investment lower and matches smaller tractors more realistically.

A 6-inch model costs more because it usually brings:

• more cutting capacity

• stronger handling of larger diameter branches

• easier feeding of bulky material

• higher throughput

• more operator control through hydraulic infeed

• better fit for repeated or heavier cleanup

In Farmry’s current lineup, that difference is easy to see. The WCAP5 starts at $1,698, the CP85 is $1,899, and the WCPH6 jumps to $2,999. That means you are paying roughly $1,100 to $1,300 more to move from a 5-inch entry point into a 6-inch hydraulic model.

For occasional cleanup, that extra spend may not be necessary. For repeated use, larger brush piles, and tougher feeding conditions, it often is.

PTO Wood Chipper Cost vs Long-Term Ownership Value

This is the part many buyers overlook.

A lower regular price may save money on day one, but ownership cost is shaped by much more than the purchase price. Over time, the real cost of a chipper includes:

• feeding effort

• throughput

• time spent processing brush

• replacement of wear parts like blades

• downtime

• operator fatigue

• how cleanly the machine handles awkward material

A chipper that feeds poorly or struggles with larger limbs can slow the entire cleanup process. A model with better hydraulic feed, stronger blades, and more stable infeed behavior may cost more upfront, but it can improve efficiency, reduce manual work, and keep the job moving.

That matters for rural property maintenance, orchard pruning, trail clearing, and light landscaping work. If you chip often, the better machine may be the cheaper machine in the long run.

Which Farmry Model Fits Your Property Best?

WCAP5: Best for Budget-Conscious Property Owners

At $1,698, the WCAP5 is the lowest-cost entry point in Farmry’s PTO lineup. It makes the most sense for buyers who want a practical chipper for normal property cleanup without stepping into a heavier-price category.

This model fits well for:

• smaller acreages

• routine pruning

• moderate brush cleanup

• first-time PTO chipper buyers

• tractors up to 45 HP

If you want to process branches into wood chips and keep costs controlled, this is the most direct starting point.

CP85: Best for Buyers Wanting a Stronger 5-Inch Option

At $1,899, the CP85 sits slightly above the WCAP5 and works for buyers who still want a 5-inch class machine but are comfortable spending a bit more for a different build or setup preference.

This is a strong fit for:

• buyers comparing two 5-inch options

• acreage owners with regular cleanup needs

• users wanting a more serious 5-inch attachment

• people who value a little more confidence before stepping into a 6-inch price range

If your tractor is still in the up-to-45-HP class but your cleanup is more frequent, the CP85 may be the more realistic choice.

WCPH6: Best for Heavier Material and Higher Productivity

At $2,999, the WCPH6 is the clear step up. It is priced higher because it delivers more than a larger opening. It adds hydraulic feed, supports tractors up to 75 HP, and is better suited to handling heavier material, larger limbs, and more demanding cleanup cycles.

This is the better fit for:

• larger properties

• repeated storm cleanup

• orchard or farm pruning with more volume

• buyers who want less manual feeding effort

• light commercial applications

If your goal is better productivity, easier feeding, and stronger real-world performance, this is where the added cost makes sense.

What PTO Wood Chipper Cost Makes Sense for Your Type of Property?

The best budget depends on your workload.

For homeowners with compact or utility tractors

A 5-inch model is usually the right place to start. If you mainly chip seasonal brush and small branches, paying for a hydraulic 6-inch machine may be unnecessary.

For small farms and orchards

A stronger 5-inch chipper can still work well, but if pruning volume is steady and the material gets bulkier, stepping into a higher-capacity model becomes easier to justify.

For larger properties with trails, fence lines, and heavier debris

A 6-inch hydraulic feed model often makes more sense. It processes more material with less stopping and less forcing at the infeed.

For light commercial use

The buyer should focus less on lowest regular price and more on uptime, feeding control, and long-term durability. This is where better build quality, better systems, and hydraulic assistance become more important.

PTO Wood Chipper vs Gas Powered Chipper Cost

Buyers often compare PTO units with gas powered machines. A gas powered chipper may look convenient because it is self-contained, but that also means another engine to fuel, maintain, and troubleshoot.

A PTO model uses the tractor you already own. That often simplifies the overall setup and reduces the number of power systems you need to maintain. For many rural buyers, that makes PTO ownership more practical.

If you already have a compatible tractor, a PTO unit is often the best wood chipper value in terms of output per dollar. If you do not own a tractor, then a gas machine may be the only realistic path. But for tractor owners, PTO usually wins on long-term value.

Final Thoughts

So, how much does a PTO wood chipper cost in 2026?

For Farmry’s current lineup, the practical answer is:

• around $1,698 for an entry 5-inch model

• around $1,899 for a stronger 5-inch option

• around $2,999 for a 6-inch hydraulic feed model

The best buying decision depends on your tractor, your property, and how often you actually chip. A lower-cost machine is fine when the workload is moderate. But when cleanup is frequent, branch size is larger, and feeding gets more demanding, paying more for hydraulic assistance and more capacity often makes sense.

If you already know your tractor size and workload, start by comparing Farmry’s pto wood chipper lineup. If you are still weighing different equipment types, browse the full wood chipper category first.

FAQs

How much does a PTO wood chipper cost in 2026?

Most PTO wood chippers in this buying range start in the high-$1,000s and move toward $3,000 for larger hydraulic models. In Farmry’s lineup, prices range from $1,698 to $2,999.

Is a hydraulic feed wood chipper worth the extra cost?

It often is if you chip frequently, handle forked branches, or want less manual feeding effort. Hydraulic feed improves control, helps process awkward material, and can improve overall efficiency.

Is a 6-inch PTO wood chipper better than a 5-inch model?

Not always. A 6-inch model is better for larger diameter material, higher volume, and more demanding cleanup. A 5-inch chipper is often the smarter value for lighter property maintenance.

What size PTO wood chipper do I need for a 45 HP tractor?

A 5-inch PTO chipper is usually the most realistic match for tractors in that range. Farmry’s WCAP5 and CP85 are both designed for tractors up to 45 HP.

What affects PTO wood chipper price the most?

The biggest factors are cutting capacity, feed type, internal cutting system, rotor diameter, overall weight, and tractor horsepower compatibility.

Are PTO wood chippers cheaper to own than gas powered chippers?

They often are for buyers who already own a tractor. PTO models remove the cost and maintenance of a separate engine, which can make long-term ownership simpler and more cost-effective.