Skip to content
Best 3 Point Mowers for Your Tractor
Best 3 pt mowers for Your Tractor
Choosing the right 3 pt mowers for your tractor can feel daunting—especially if you’re not an expert. This guide breaks it down clearly, comparing flail mowers by horsepower, cutting width, and terrain type so you can find the ideal match.
What Is a 3 Point Flail Mower and Why Choose One?
A 3 point flail mower connects directly to your tractor’s hitch, delivering power through the PTO shaft to a rotating drum equipped with flail blades. Unlike traditional rotary decks, the flail design offers safer and finer shredding—great for tackling brush, tall grass, and even woody material like small branches. The vertical orientation of the rotor allows the blades to swing freely, which minimizes damage when hitting rocks or uneven ground.
What to Look For in a Flail Mower
Horsepower & Tractor Compatibility
-
Compact mowers (45″–61″ cutting width) run well on 15–35 HP tractors—ideal for small acreage work.
-
Bigger machines (63″–87″ decks) require 35–85 HP or more for brush and rugged terrain clearing.
Blade Type & Deck Design
-
Choose Y blades or hammer-style for a fine, clean cut on grass, or heavy-duty blades for thick brush.
-
Look for a reinforced deck, rear roller, and skid plates for stability on slopes and uneven ground, especially around fences.
Safety & Drive Protection, self contained hydraulic system
-
Models with a slip clutch or gearbox freewheel protect both mower and tractor if blades hit an obstacle.
-
Self contained hydraulic system or hydraulic side shift can move the deck laterally for precision along fence lines and ditches.
Best 3 Pt Mowers by Category
Compact (15–35 HP)
-
Model: 45″ LFS45 Flail Mower – Great for lighter jobs, mowing trails, and residential fields. Powered by a 540 RPM PTO with a reinforced deck and roller.
Mid‑Size (25–85 HP; side‑shift)
-
Model: 61″ MFSS61 Hydraulic Side‑Shift – Add versatility with hydraulic offset to operate near slopes or under low-hanging trees.
Heavy‑Duty (35–85 HP +)
-
63″, 71″ 79”& 87″ HFS Series – These machines offer wide cutting paths with rugged gearboxes, Y blades, and hammer blades. Perfect for overgrown fields, tall grass, and material like saplings.
Farmry’s Top 3 Pt Mower Picks
|
Model |
HP Range |
Cutting Width |
Offset |
Blade Type |
Best For |
|---|---|---|---|---|---|
|
15–35 HP |
45″ |
No |
Y & Hammer |
Compact areas, grass mowing |
|
|
25–85 HP |
61″ |
Yes |
Y & Hammer |
Brush, orchards, fence work |
|
|
35–85 HP |
79″ |
No |
Hammer |
Large properties, rough brush |
Tips for Choosing the Right Flail Mower
-
Match your tractor’s HP to the mower’s spec to avoid strain on the gearbox.
-
Understand your land—flat fields or areas with uneven ground? Pick a mower with hydraulic shift if needed.
-
Blade selection matters—hammer blades for dense brush, Y blades for clean grass cuts.
-
Protect your investment—gearbox with slip clutch or freewheel reduces damage from debris.
-
Think maintenance—features like centralized grease points and vertical service access panels help extend machine life.
FAQs
What size PTO and horsepower do I need?
A 15–35 HP PTO suits compact 45″–53″ decks, while 35–85 HP drives larger decks and heavy-duty models. Always verify specifications before purchase.
Can flail mowers handle uneven terrain and slopes?
Yes—thanks to deck rollers and flexible blades that adjust to the ground. Side‑shift models help you trim edges more precisely.
Will these mowers cut material like small trees?
They can handle woody stems up to 2–3″ thick. For larger limbs, manual cutting is recommended before mowing.
Final Thoughts: The Right Tool for the Job
Choosing a 3 pt mower with the proper blade type, cutting width, and features like hydraulic offset ensures better performance. Farmry’s flail mowers offer a great combination of versatility, power, and durability—ready to handle mowing near fences, over tough ground, and across challenging terrain. With quality attachments and dependable equipment, Farmry helps you get the most out of your tractor.
